Creep, (tečení materiálu), je jev, při kterém postupně dochází k deformaci materiálu, když na materiál po delší dobu nepřetržitě působí konstantní zatížení. Jde o důležitou vlastnost při volbě vhodného materiálu do konkrétních aplikací. Předmětem této diplomové práce je především zkoumání této vlastnosti u pěti různých elastomerních materiálů. V teoretické části je popsána moderní bezkontaktní optická metoda DIC k měření deformací, stav deformace a napjatosti, vlastnosti kaučuků a elastomerních materiálů a prováděné mechanické zkoušky.
V praktické části je popsán postup zkoušení tečení materiálu během jednoosého a dvouosého zatížení pro všechny dané jednotlivé elastomerní materiály a výsledky těchto zkoušek zaznamenány za pomoci tabulek a grafů.
Annotation in English
Creep, is a phenomenon in which a material gradually deforms when a constant load is continuously applied to the material over a long period of time. This is an important characteristic when selecting the right material for specific applications. The main subject of this master thesis is the investigation of this property in five different elastomeric materials. The theoretical part describes the modern non-contact optical DIC method for strain measurement, the state of deformation and stress, the properties of rubbers and elastomeric materials and the mechanical tests.
The creep testing of the material during uniaxial and biaxial loading for all given individual elastomeric materials is described in the practical part and the results of these tests are presented using tables and graphs.
Creep, (tečení materiálu), je jev, při kterém postupně dochází k deformaci materiálu, když na materiál po delší dobu nepřetržitě působí konstantní zatížení. Jde o důležitou vlastnost při volbě vhodného materiálu do konkrétních aplikací. Předmětem této diplomové práce je především zkoumání této vlastnosti u pěti různých elastomerních materiálů. V teoretické části je popsána moderní bezkontaktní optická metoda DIC k měření deformací, stav deformace a napjatosti, vlastnosti kaučuků a elastomerních materiálů a prováděné mechanické zkoušky.
V praktické části je popsán postup zkoušení tečení materiálu během jednoosého a dvouosého zatížení pro všechny dané jednotlivé elastomerní materiály a výsledky těchto zkoušek zaznamenány za pomoci tabulek a grafů.
Annotation in English
Creep, is a phenomenon in which a material gradually deforms when a constant load is continuously applied to the material over a long period of time. This is an important characteristic when selecting the right material for specific applications. The main subject of this master thesis is the investigation of this property in five different elastomeric materials. The theoretical part describes the modern non-contact optical DIC method for strain measurement, the state of deformation and stress, the properties of rubbers and elastomeric materials and the mechanical tests.
The creep testing of the material during uniaxial and biaxial loading for all given individual elastomeric materials is described in the practical part and the results of these tests are presented using tables and graphs.
SMITH, L. P. The language of rubber: an introduction to the specification and testing of elastomers. Oxford: Butterworth-Heinemann, 1993, x, 255 s. ISBN 0-7506-1413-7.
SUTTON, M.A., ORTEU, J.J., SCHREIER, H. Image Correlation for Shape, Motion and Deformation Measurements. Springer US, 2009, 321 s. ISBN 978-0-387-78746-6.
EIRICH, F. R., ERMAN, B., MARK, J.D. Science and technology of rubber. 3rd ed. Amsterdam: Elsevier Academic Press, 2005. 743 s. ISBN 0124647863.
Recommended resources
SMITH, L. P. The language of rubber: an introduction to the specification and testing of elastomers. Oxford: Butterworth-Heinemann, 1993, x, 255 s. ISBN 0-7506-1413-7.
SUTTON, M.A., ORTEU, J.J., SCHREIER, H. Image Correlation for Shape, Motion and Deformation Measurements. Springer US, 2009, 321 s. ISBN 978-0-387-78746-6.
EIRICH, F. R., ERMAN, B., MARK, J.D. Science and technology of rubber. 3rd ed. Amsterdam: Elsevier Academic Press, 2005. 743 s. ISBN 0124647863.
Enclosed appendices
-
Appendices bound in thesis
illustrations, graphs, schemes, tables
Taken from the library
No
Full text of the thesis
Appendices
Reviewer's report
Supervisor's report
Defence procedure record
Student představil komisi výsledky své diplomové práce. Poté byla komise seznámena s posudky a hodnocením vedoucího a oponenta. V rámci posudku byly studentovi položeny dotazy oponenta: ZODPOVĚZEN ZCELA Poté byla vedena diskuze o diplomové práci, během které byly jednotlivými členy komise položeny následující dotazy: doc. Ing. Josef Chladil, CSc. Jaké rozměry mělo tělísko pro měření dvouosého zatížení? ZODPOVĚZEN ZCELA, Co jste vyhodnocoval při měření? ZODPOVĚZEN ZCELA, V jaké poloze byly nastaveny kamery vůči měřenému tělísku? ZODPOVĚZEN ZCELA, doc. Ing. Karel Stoklasa, CSc. Byla měřena objemová změna? ZODPOVĚZEN ČÁSTEČNĚ, doc. Ing. Oldřich Šuba, CSc. Jaké napětí jste určoval zkouškou jednoosého tahu? ZODPOVĚZEN ČÁSTEČNĚ.