Hlavním cílem diplomové práce je studování vlivu různých druhů uhličitanů vápenatých (CaCO3) na tepelnou stabilitu PVC směsi. Nadále byl také sledován vliv účinku koncentrace jednotlivých typů CaCO3 na vlastnosti PVC. Pro přípravu kompozitních vzorků byl použit suspenzní PVC (Neralit 601) jako polymerní matrice a dále byly použity 3 typy uhličitanu vápenatého (Socal 312 V, Omya EXH 1 SP, RH 1954) jako plnivo, které se lišily především velikostí částic a povrchovou úpravou. Kompozitní vzorky byly připraveny válcováním na dvouválci a následným lisováním. Zhotovené kompozitní materiály byly testová-ny nejen zkouškou tepelné degradace, ale i tahovými zkouškami. U degradovaných vzorků byl také studován stupeň degradace spektrofotometrickým měřením.
Anotace v angličtině
The main aim of the Master’s thesis is studying of influence of the different types of calcium carbonate (CaCO3) on the PVC compounds thermal stability. In addition, the effect of these CaCO3 concentrations on PVC properties was investigated. The suspension type of PVC (Neralit 601) as polymer matrix and three kinds of CaCO3 (Socal 312 V, Omya EXH 1 SP, RH 1954) as fillers, which were different by particle size and surface modification, for the preparation of the composite samples were applied. The composite samples were prepared using the laboratory double roll mill and then the specimens were moulded in the hand press. Further, the disposed composite materials were examined by thermal degradation and tension tests. Consequently, the degraded samples were put to the test of degradation degree using spectrophotometric method.
Hlavním cílem diplomové práce je studování vlivu různých druhů uhličitanů vápenatých (CaCO3) na tepelnou stabilitu PVC směsi. Nadále byl také sledován vliv účinku koncentrace jednotlivých typů CaCO3 na vlastnosti PVC. Pro přípravu kompozitních vzorků byl použit suspenzní PVC (Neralit 601) jako polymerní matrice a dále byly použity 3 typy uhličitanu vápenatého (Socal 312 V, Omya EXH 1 SP, RH 1954) jako plnivo, které se lišily především velikostí částic a povrchovou úpravou. Kompozitní vzorky byly připraveny válcováním na dvouválci a následným lisováním. Zhotovené kompozitní materiály byly testová-ny nejen zkouškou tepelné degradace, ale i tahovými zkouškami. U degradovaných vzorků byl také studován stupeň degradace spektrofotometrickým měřením.
Anotace v angličtině
The main aim of the Master’s thesis is studying of influence of the different types of calcium carbonate (CaCO3) on the PVC compounds thermal stability. In addition, the effect of these CaCO3 concentrations on PVC properties was investigated. The suspension type of PVC (Neralit 601) as polymer matrix and three kinds of CaCO3 (Socal 312 V, Omya EXH 1 SP, RH 1954) as fillers, which were different by particle size and surface modification, for the preparation of the composite samples were applied. The composite samples were prepared using the laboratory double roll mill and then the specimens were moulded in the hand press. Further, the disposed composite materials were examined by thermal degradation and tension tests. Consequently, the degraded samples were put to the test of degradation degree using spectrophotometric method.
1. Vypracujte literární rešerši zaměřenou na využití uhličitanu vápenatého ve směsi PVC, zejména vliv na tepelné vlastnosti
2. Připravte PVC kompozity s různým obsahem uhličitanu vápenatého a sledujte vliv koncentrace plnění na tepelné vlastnosti PVC směsi
3. Diskutujte a porovnejte vlastnosti připravených PVC vzorků
Zásady pro vypracování
1. Vypracujte literární rešerši zaměřenou na využití uhličitanu vápenatého ve směsi PVC, zejména vliv na tepelné vlastnosti
2. Připravte PVC kompozity s různým obsahem uhličitanu vápenatého a sledujte vliv koncentrace plnění na tepelné vlastnosti PVC směsi
3. Diskutujte a porovnejte vlastnosti připravených PVC vzorků
Seznam doporučené literatury
1. Wilkes, C. E., Summers, J. W. et al., PVC Handbook, Hanser Gardner Publications, Cincinnati, 2005, ISBN: 1569903794, 723 s.
2. Wypych, G., PVC Degradation & Stabilization, ChemTec Publishing, 2008, Electronic ISBN 978-1-60119-645-3, p. 521.
3. Murphy, J., Additives for Plastics Handbook, 2nd Edition, Elsevier, 2001, Electronic ISBN 978-0-08049-861-4, p. 515.
4. Zhu, S., Zhang, Y., Zhang, C., Effect of CaCO3/LiCO3 on the HCl generation of PVC during combustion, Polymer Testing 22, 2003, p. 539 - 543
5. Hu, L., Dong, P., Zheng, G., Preparation of active CaCO3 nanoparticles and mechanical properties of the composite materials, Materials Letters, 2009, v. 63, p. 373 - 375
Seznam doporučené literatury
1. Wilkes, C. E., Summers, J. W. et al., PVC Handbook, Hanser Gardner Publications, Cincinnati, 2005, ISBN: 1569903794, 723 s.
2. Wypych, G., PVC Degradation & Stabilization, ChemTec Publishing, 2008, Electronic ISBN 978-1-60119-645-3, p. 521.
3. Murphy, J., Additives for Plastics Handbook, 2nd Edition, Elsevier, 2001, Electronic ISBN 978-0-08049-861-4, p. 515.
4. Zhu, S., Zhang, Y., Zhang, C., Effect of CaCO3/LiCO3 on the HCl generation of PVC during combustion, Polymer Testing 22, 2003, p. 539 - 543
5. Hu, L., Dong, P., Zheng, G., Preparation of active CaCO3 nanoparticles and mechanical properties of the composite materials, Materials Letters, 2009, v. 63, p. 373 - 375
Přílohy volně vložené
-
Přílohy vázané v práci
grafy, tabulky
Převzato z knihovny
Ne
Plný text práce
Přílohy
Posudek(y) oponenta
Hodnocení vedoucího
Záznam průběhu obhajoby
Ing. Slaník: Jaký je tvar NANO - a MIKRO-uhličitanu vápenatého, vliv na vlastnosti.
doc. Čermák: Lze z maxima z WAXS usuzovat cokoliv o velikosti primárních částic?